FXR Chain Drive Conversion Kits for 85-94 FXR Models

23 Trans.jpg
23 Trans 2.jpg
Chain Sprocket.jpg
23 Trans.jpg
23 Trans 2.jpg
Chain Sprocket.jpg

FXR Chain Drive Conversion Kits for 85-94 FXR Models

132.25

FXR Chain Drive Conversion Kits for 85-94 FXR Models

A .200 offset sprocket allows for you to run a 150 rear tire by converting from a Belt to a Chain Drive on the 1985-1994 FXR Models and INCLUDES rear sprocket spacer

Stock Final Drive Ratio is 2.1875 when running a Belt… The NEW Drive Ratio is 2.125 when running a 24 tooth front sprocket and a 51 tooth rear when converting to chain.

*** To use on 94 and up, the Drive Sprocket Spacer and Seal must be replaced to pre-94 type (available on our site)

22 Tooth Transmission Sprocket:

.500 offset for 530 O Ring Chain and includes the wheel spacer for converting a belt drive to a chain drive. 

23 Tooth Transmission Sprocket:

.500 offset for 530 O Ring Chain and includes the wheel spacer for converting a belt drive to a chain drive. 

24 Tooth Transmission Sprocket:

.500 offset for 530 O Ring Chain and includes the wheel spacer for converting a belt drive to a chain drive. 

And a 51 Tooth Rear Sprocket:

Chrome Rear Sprocket with a 16mm offset

NOTE: Remember a larger sprocket on rear means more torque (geared down) and a larger front sprocket means higher gears, more top end. 

Drive Ratio:

22/51 - 2.318

23/51 - 2.217

24/51 - 2.125 (Closest to Stock Ratio of 2.1875)


Drive Ratio:
Quantity:
Add To Cart